Duncanville Electrical Company handles the full range of residential and commercial electrical work across Duncanville and Dallas County. Whether you need a single outlet repaired, a panel upgraded, new wiring run for an addition, or an EV charger installed in your garage, we scope the job on the call and confirm the price before anything is scheduled. One call. One electrician. One price, agreed first.
Flickering lights and warm outlets are warning signs, not quirks. If something in your home or building is behaving oddly with the power, that is worth a phone call, not a wait-and-see. We give you straight answers about your panel and wiring so you know what you are dealing with before any work begins.
Call (469) 249-3264 for a quote.
Some homes need a full rewire. Others just need one outlet fixed. Either way, the first step is finding out exactly what is wrong, and that is where we start.
Dead outlets, breakers that trip and will not reset, lights that flicker when the refrigerator kicks on, a burning smell near a switch, a sparking outlet when you plug something in. These are the calls we handle, and each one gets a proper diagnosis before any repair happens. We check the circuit, trace the wiring, and identify the fault rather than guessing at it.
GFCI and AFCI protection come into that conversation regularly. A tripping GFCI outlet in the kitchen or bathroom may be doing exactly what it is supposed to, or it may be pointing to a wiring problem further down the circuit. An AFCI breaker that trips repeatedly is flagging arc activity in the wiring, and that is not something to reset and ignore. We sort out which is which.
We take calls every day from 6:30 AM to 8:30 PM, including weekends. Call when the power goes out in one room and we will work through the schedule with you. We trace the fault. We fix the wiring. We restore the power.
Here is what most people get wrong about their wiring: the panel is where most electrical problems either start or show up first, and a panel that cannot handle the load in a modern home is not just inconvenient, it is a problem that grows.
Breakers that buzz, panels that run warm, circuits that trip under normal use, or a box that simply does not have room for new circuits. These are signs that the service may need attention. A 100-amp panel that made sense for a house built decades ago may not be adequate for the same house today with central air, an electric range, a home office, and a car charger all drawing from it. We handle 200-amp service upgrades, service-entrance work, and load calculations to figure out what the house actually needs.
Dedicated appliance circuits and subpanel installations are part of that same conversation. A new range, a dryer, or a large workshop tool each needs its own circuit sized for the load. Commercial properties with panel capacity questions or multi-tenant buildings that need service work handled between tenants are jobs we take on as well.
All of this is electrical work done to the code inspectors here enforce, which matters when the job gets inspected and when the property changes hands. Call and we will handle the lights, outlets, and panel.
For residential and commercial electrical work alike, the everyday jobs are often the most practical ones to get right. An outlet that stopped working, a switch that needs replacing, a ceiling fan that needs wiring, a room that needs proper lighting. These are not small jobs to put off. They are the things that make a space work.
GFCI outlets in kitchens, bathrooms, garages, and outdoor locations are a code requirement in most situations and a practical safeguard in all of them. We install them as replacements and as part of larger circuit work. USB outlets, 240-volt outlets for appliances, and AFCI breakers for bedroom circuits are all part of the same category of work.
On the lighting side, we handle recessed lighting layouts, LED fixture installation, under-cabinet lighting in kitchens, and outdoor and security lighting including motion sensor fixtures. Ceiling fan installation and replacement, including running new wiring where there is no existing box, is a regular part of the work. If the fan wobbles, flickers, or simply will not run on all speeds, we look at the wiring before assuming the fan itself is the problem.
We'll find the fault and fix it right.
Duncanville's mix of established neighborhoods and ongoing development creates a specific set of electrical needs. Hot Texas summers push electrical loads hard, and storm season in this part of Dallas County means surge events and power interruptions are a real and recurring concern. The three services below come up often here for exactly those reasons.
Older neighborhoods in Duncanville carry homes with panels that were installed when the electrical demands of a household were far lower than they have since become. A 100-amp service feeding a house that now runs central air conditioning, multiple large appliances, and a home office is working harder than it was designed to. We handle the full upgrade: new panel, service-entrance work, capacity sized for current and planned loads, and wiring for the circuits that feed it. If an EV charger or additional appliance is part of the plan, we factor that into the load calculation from the start.
Texas storm season is not theoretical. Ice storms, severe thunderstorms, and the kind of extended outages the state has seen in recent years make backup power a practical consideration rather than a luxury. We handle the electrical side of generator installation: the transfer switch, the wiring, the dedicated circuit, and the disconnect that keeps the generator safely isolated from the utility line. Whether the setup involves a standby unit or a portable generator hookup, the transfer switch is what makes it safe and functional.
A power strip with a surge suppressor handles what is plugged into it and nothing else. A whole-home surge protector installs at the panel and catches voltage spikes before they reach the wiring in the walls and the appliances connected to it. In an area where summer thunderstorms can send surges through the lines multiple times in a season, panel-level protection is a reasonable step. The work area left as it was found, and the installation itself is straightforward once the panel is open.
The homes and wiring in this area have their own quirks, and older homes in Duncanville are no exception. Knob-and-tube wiring, aluminum branch circuit wiring, and undersized circuits from earlier decades are still present in a number of homes across Dallas County. These are not automatic emergencies, but they are worth knowing about, and they affect what can safely be added to the system.
We handle full rewiring projects and partial rewiring where only specific circuits or areas of the home need updating. Aluminum wiring remediation, where connections are treated or replaced to reduce the risk of overheating at outlets and devices, is a distinct service from full rewiring and often the right scope for the situation.
Dedicated circuits for dryers, electric ranges, EV chargers, and workshop equipment are a separate category. Each of these loads needs its own circuit, the right wire gauge, and a breaker sized to match. We run those circuits from the panel, confirm the breaker sizing, and install the correct outlet for the application. For home additions and remodels, we handle the electrical rough-in from the start so the wiring is in the wall before the drywall goes up. Give us a call and consider it handled.
A Level 2 EV charger runs on a 240-volt dedicated circuit and charges a vehicle several times faster than a standard wall outlet. The installation involves running the right wire gauge from the panel to the garage or parking area, installing a properly rated outlet or hardwired connection, and confirming that the panel has the capacity to carry the added load without affecting other circuits. If the panel is already near capacity, that is part of the conversation before the circuit is run.
Generator hookup work follows a similar pattern. The transfer switch is the critical piece. It isolates the generator from the utility line so that power feeding back into the grid does not create a hazard, and it routes generator power to the circuits that matter most during an outage. We handle the wiring, the transfer switch installation, and the dedicated circuit the generator connects to. We'll find the fault and fix it right.
Property managers have their own priorities when the power goes out, and those priorities are different from a homeowner's. A tripped breaker in a residential unit is an inconvenience. The same problem in a commercial space with tenants, customers, or equipment on the line is a business problem that needs to move quickly.
We work with property managers, business owners, and commercial tenants on the electrical side of their operations. Tenant improvement wiring, commercial panel upgrades, lighting installation across retail and office spaces, and outlet and circuit installation for equipment are all part of the work. Commercial electrical inspections, whether for a lease renewal, a change of use, or a property sale, give the building owner a clear picture of what the system looks like and what, if anything, needs attention.
Findings are explained in plain terms. You get straight answers about your panel and wiring, not a report full of code citations that require a second conversation to interpret. Call and we will handle the lights, outlets, and panel.
An electrical inspection covers the things that are easy to miss and expensive to find out about later. Panel condition, wiring age and type, grounding and bonding, GFCI and AFCI protection in the locations that require it, outlet and switch condition throughout the home or building. For a homebuyer, that picture is worth having before the purchase closes. For a seller or landlord, it identifies anything that needs to be addressed before the property changes hands or a new tenant moves in.
We walk through what we find and explain it directly. If the panel needs attention, you will know why. If the wiring is older but functional, that gets explained too. The inspection is a tool for making a decision, not a document handed over without context.
When you call, the first thing we do is scope the job. What is the symptom, what has already been checked, what is the property type, and what does the work likely involve. From that conversation, you get a price before anything is scheduled. If the scope changes once we are on site, that conversation happens before the work continues, not after.
There is no process where you agree to a visit and find out the cost at the end. The price is confirmed on the call, and the work starts from there. For larger jobs like panel upgrades, rewiring, or EV charger installation, the scope and the price are settled before the first day of work. We'll find the fault and fix it right.
We serve Duncanville and the communities nearby throughout Dallas County and the surrounding metro. That includes Cedar Hill, DeSoto, Lancaster, Glenn Heights, Grand Prairie, Midlothian, Mansfield, and Balch Springs. If you are in the area and need electrical work handled, call and we will confirm whether your address falls within our range.
We serve Duncanville and residential and commercial addresses throughout Dallas County. That includes Cedar Hill, DeSoto, Lancaster, Glenn Heights, Grand Prairie, Midlothian, Mansfield, and Balch Springs.
If you are not sure whether your address falls within the range, call (469) 249-3264 and we will confirm.
Call (469) 249-3264 and describe the job: what the symptom is, what the property looks like, and what you have already checked or noticed.
From that conversation, we give you a price before anything is scheduled. Nothing is booked until you have agreed to the price and the scope.
It helps to know where the problem is showing up, whether it is in one room or across the whole house, and whether the circuit breaker has tripped. If the issue is at the panel, knowing whether it is a breaker that won't reset or a panel that feels warm gives us a clearer starting point. The more detail you can share on the call, the more accurate the quote.
Stop using the outlet or circuit immediately and do not reset the breaker if it has tripped. If there is smoke or a burning smell coming from the panel, leave the area and call your utility company to disconnect the service before calling us.
Once it is safe to do so, call (469) 249-3264 and we will work through the schedule to get someone there as quickly as possible.
The price is confirmed on the call based on the scope described. If something unexpected turns up on site that changes the scope, that conversation happens before the work continues, not after. You are not handed a bill at the end that does not match what was agreed.
Someone needs to be present to provide access and to walk through the job before work begins. If you cannot be there yourself, arrange for another adult who can show the electrician where the panel is, which outlets or switches are affected, and what the job involves.
We are available every day from 6:30 AM to 8:30 PM, which covers early morning starts and evening appointments.
Call (469) 249-3264 to describe the job and ask what the schedule allows for your preferred time.
Evenings and weekends are available for homeowners who cannot take time off during the week.
A single outlet repair or breaker replacement usually takes less than an hour once the fault is located. A panel upgrade or a full rewire is a larger project that may take a full day or more depending on the scope. The call is where we work through the likely time frame based on what the job actually involves.
A repair addresses a specific fault, whether that is a failed breaker, a bad connection, or a damaged outlet. A panel upgrade replaces the entire service panel and is typically needed when the existing panel cannot support the load the home is putting on it. We explain which applies to your situation on the call, based on what you describe.
That is a normal starting point. Describe what you are seeing or hearing, when it happens, and whether it affects one area or the whole house. From that, we can usually narrow down the likely cause and give you a reasonable scope before the visit. The diagnosis on site confirms it.
Clear access to the panel and to the outlets, switches, or fixtures involved in the job. If furniture is blocking the panel or the affected area, moving it beforehand saves time. Beyond that, the electrician handles the rest.
For most repairs and installations, the circuit being worked on will need to be de-energized. Whether the whole house needs to be without power depends on the scope of the job. A panel replacement requires the service to be shut off, while outlet or switch work typically affects only the circuit involved. We confirm what to expect on the call before the visit.
One call. One electrician. One price, agreed first. We are available every day from 6:30 AM to 8:30 PM.
Call (469) 249-3264 for a quote and we will scope the job, give you a price, and get it on the schedule.
Below is a plain-language look at the electrical work we handle for homes and commercial properties in Duncanville and across Dallas County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call.
If a row describes a problem you recognize, call us at (469) 249-3264 and we will walk through what the job involves and confirm a price before anything is scheduled.
| Type of Work | What the Job Involves | Ideal For | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits | Dryer and range circuitsRefrigerator and dishwasher circuitsHot tub and pool supply wiring240-volt circuit installation | Homeowners installing a large appliance or dealing with a breaker that trips under appliance load | Sharing a circuit with other loads is a code violation for most major appliances. A dedicated circuit is the correct fix and usually the permanent one. |
| Electrical Panel & Service Upgrades | 100-to-200-amp service upgradeLoad calculationsPanel replacementCapacity checks before new circuits | Older homes adding appliances, EV chargers, or square footage | Dallas County summers put sustained load on panels for months. Older 100-amp services in Duncanville neighborhoods frequently can not keep up with modern household demand. |
| Older-Home Rewiring | Knob-and-tube removal and replacementAluminum branch circuit remediationUngrounded outlet upgradingFull or partial rewire scoping | Homes built before the 1980s with original wiring still in place | Insurance carriers increasingly flag older wiring systems. A pre-sale inspection or a carrier review often prompts the call. We assess the scope and explain what a partial or full rewire involves before any work starts. |
| Electrical Repairs & Troubleshooting | Fault tracing and diagnosticsDead outlets and tripped breakersPartial power lossBurning smells and warm covers | Homeowners or tenants with a visible symptom and no clear cause | The symptom and the source are often in different locations. We trace the fault before replacing anything. |
| EV Charger Installation | Dedicated 240-volt circuitPanel capacity checkWiring run to garage or drivewayCharger mounting and connection | Homeowners with a new or incoming electric vehicle | If the panel is already near its limit, an upgrade may need to happen before the charger circuit is added. We work through that on the call before scheduling. |
| Backup Generator Installation | Transfer switch installationDedicated generator circuitPanel connection and disconnectUtility isolation wiring | Dallas County homeowners preparing for grid events and severe weather seasons | The transfer switch is the critical piece. It prevents back-feed to the grid and allows safe switching between utility and generator power. We handle the wiring side of the installation. |
| Whole-Home Surge Protection | Panel-level surge device installationFull-house circuit coverageProtection against utility-line spikesSingle-visit installation | Homes with sensitive electronics or in areas with frequent thunderstorm activity | Dallas area thunderstorm seasons send surges through utility lines regularly. A panel-level device catches that energy at the point of entry before it reaches individual circuits. |
| Wiring & Circuit Installation | New circuit runs from the panelCircuit sizing for the loadWiring for additions and outbuildingsSubpanel installation where needed | Remodels, additions, garages, and workshops that need circuits from scratch | Adding a circuit is often simpler than people expect. Panel capacity is confirmed before any wiring starts mid-job. |
| Ceiling Fan Installation | New box and wiring runsFan replacement in existing boxesWiring confirmation before mountingSwitch and control wiring | Rooms without an existing ceiling box or homeowners replacing an old fan | Where no rated ceiling box exists, we run the wiring and install one before the fan goes up. Skipping that step is a common DIY mistake. |
| Lighting Installation | Recessed and task lightingExterior security and motion lightsLandscape and path wiringFixture swaps and under-cabinet wiring | Homeowners upgrading interior lighting or adding outdoor security coverage | Exterior wiring uses materials and boxes rated for outdoor exposure. We confirm the right spec on the call before the visit. |
| Outlet & Switch Installation | GFCI and AFCI outlet installationDimmer and standard switch replacementAdding outlets to underserved roomsCode-compliance corrections | Homeowners updating an older home or preparing for a remodel or sale | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. A pre-sale inspection will surface missing coverage quickly. |
| Breaker & Fuse Repair | Breaker replacementFuse box repairTripped or failing breaker diagnosisPanel interior inspection | Homes where a breaker trips repeatedly or will not reset | A breaker that trips under normal load is telling you something. Resetting it without finding the cause leaves the problem in place. |
| Electrical Safety Inspections | Panel condition and grounding reviewGFCI and AFCI coverage checkVisible wiring assessmentFindings explained in plain terms | Buyers, sellers, landlords, and homeowners after a renovation | An inspection gives you a clear picture of where the system stands against current code. If issues are found, we explain what each one means before anything is scheduled. |
Call (469) 249-3264 any day between 6:30 AM and 8:30 PM and we will walk through what the job involves, confirm a price, and get it on the schedule.
(469) 249-3264