When something goes wrong with the power in a Lewisville home or commercial property, the first question is usually the same: how soon can someone be out, and what is this going to cost. We handle both of those on the call. The scope gets worked out before anything is scheduled, the price is confirmed before anyone shows up, and the work starts from there.
Call (469) 249-3264 to get a quote.
Lewisville is a large city with a wide mix of property types, and the electrical work reflects that. Older homes on circuits that have never been touched sit a few streets over from newer builds adding EV chargers and panel capacity. Apartment turnovers, commercial tenant fit-outs, and properties being prepped for sale all generate different needs. Whatever the situation, call us and we work through what the job actually involves before we schedule anything. That is what we do for every property we serve.
The price for any electrical job is built from three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry whatever is being added or changed.
A straightforward outlet replacement or a breaker swap is a short conversation. A panel upgrade that also needs a service-entrance replacement, or a rewire that runs through finished walls, involves more variables and those get worked through on the call before a price is given. If the scope changes once work is underway, that conversation happens before the additional work proceeds. You are not handed a bill at the end that does not match what was agreed.
Call (469) 249-3264, describe what is happening and what the property looks like, and you get a price.
There is nothing to submit online and no form to fill out. The call is where the quote happens.
Scheduling a visit means finding a time that works for the property and the people in it. We are available every day from 6:30 AM to 8:30 PM, which covers early starts for landlords who need work done between tenants and evening appointments for homeowners who cannot take time off during the week.
When a problem will not keep, that is a different conversation. A sparking outlet, a panel that smells like burning, or a partial power loss that is affecting a whole section of the building are not situations to leave until next week. Call and ask what the schedule allows. We take short-notice work and answer calls every day within those hours.
For businesses and rental properties that have to stay operational, we talk through access and timing on the call. A commercial space that cannot shut down a circuit during business hours needs a different approach than a vacant unit. We work that out before anyone shows up, not after.
Homes across this area have every kind of panel and circuit in them. A large city like Lewisville has housing stock that spans decades, and the electrical work reflects that range. The jobs below come up regularly across the properties we serve here.
A dedicated circuit means one circuit, one load, nothing else sharing it. Electric ranges, wall ovens, and dryers each require their own circuit sized to the amperage the appliance draws. Running that circuit involves pulling wire from the panel, installing the correct outlet for the application, and confirming the breaker is matched to the load. If the panel is already near capacity, that gets worked out before the circuit is run, not after.
Battery-only detectors fail when the battery dies. Hardwired alarms draw from the home's electrical system and include a battery backup for power outages, and interconnected units alert the whole building when one triggers. For landlords and property managers in Lewisville, hardwired interconnected alarms are both a practical safeguard and a common requirement before a unit can be rented or sold. We handle the wiring and the installation.
Fixture swaps, recessed lighting layouts, under-cabinet wiring, and task lighting in kitchens and workspaces are regular installs. The work covers more than swapping one fixture for another. Older homes often have ceiling boxes that are not rated for the weight of a fan or a heavier fixture. We confirm the box, the wiring, and the circuit before anything goes up.
A detached garage, a workshop, a shed, or an electric gate at the property line all need a supply run from the main panel or a subpanel. The wiring method depends on how far the run is, whether it goes underground or overhead, and what load the structure needs to carry. An outbuilding with a single light is a different job from a workshop running a table saw and a compressor. We scope it on the call.
These come up on their own as well as part of kitchen and laundry renovations. A property that has never had an electric range before needs a new 240-volt circuit run from the panel. A dryer circuit in a laundry area that was converted from a gas setup needs the same. GFCI and AFCI protection requirements for the surrounding circuits in those spaces are part of the same conversation. Details on each of these are on the list of electrical services we handle.
Some faults sit on the utility side of the meter, not on the building's wiring. Partial power loss affecting half the circuits in the house, a voltage problem that is causing lights to dim and brighten on their own, or a complete outage that affects the whole street are situations where the issue may be upstream of the meter entirely.
When a call comes in with those symptoms, we talk through what is happening before assuming the fault is in the building's wiring. If the evidence points to the utility's equipment, the next step is a call to the utility company, not an electrician. We help you work out which side of the line the problem is on. If it turns out to be the utility's responsibility, we tell you that clearly rather than scheduling a visit that will not fix anything.
Where the fault is on the building side, or where the utility has restored service but something in the panel or wiring still is not right, that is where we come in. We trace the fault, identify what it affected, and repair it.
Every circuit, outlet, switch, and fixture worked on gets tested before the job is called complete. Outlets are checked for correct wiring and ground continuity. Panels are inspected before they are closed. Lighting and fans are cycled through their functions. Nothing is left in a state that requires a callback to verify.
For larger jobs, particularly panel upgrades, rewires, and new circuit installations, the work is documented. Breakers are labeled to reflect what they actually feed. Where the scope of the job affects what a future owner or tenant needs to know about the system, that information is written down in plain terms, not left as a question for the next electrician who opens the panel.
This matters at resale and at lease renewal. A property with a clearly labeled panel and documented electrical work is easier to inspect, easier to insure, and easier to sell. Straight answers about your panel and wiring are part of what the visit covers.
Matching a replacement part to what is already in the property is not always straightforward. Older panels use breaker types that are no longer manufactured by the original maker, and fitting an incompatible breaker into a panel it was not designed for creates a problem rather than solving one. We identify what the panel takes before ordering anything.
For standard repairs and most outlet, switch, and fixture work, parts are handled as part of the job. When something is genuinely obsolete or has to be sourced from a specialty supplier, we tell you that on the call or on site before the timeline changes. A job that wraps up in a single visit is different from one that needs a part ordered, and you will know which applies before work begins.
When knob-and-tube wiring or aluminum branch circuit wiring is part of the picture, the approach depends on the scope. A full replacement is one option. Targeted remediation at connections and devices is another. We explain what each involves and what it costs before any work is scheduled.
We serve Lewisville and the surrounding areas throughout Denton County. That includes The Colony, Hebron, Hickory Creek, Highland Village, and Lakewood Village.
If you are in one of those communities and need electrical work handled, call (469) 249-3264 and we will confirm your address is in range.
Commercial properties, rental units, and residential homes across this part of Denton County are all part of the work we take on. Panel upgrades, backup generator hookups, surge protection, EV charger circuits, and everyday repairs are all on the table. The scope is worked out on the call, the price is confirmed before anything is scheduled, and the work is done to the code inspectors here enforce.
Ceiling fans and fixtures at significant height require stable access to install safely. For high ceilings, we confirm what is needed before the visit so the work can be completed in a single trip. Describe the ceiling height on the call so we can plan accordingly.
Hardwired smoke and carbon monoxide alarm installation, GFCI outlet upgrades in kitchens and bathrooms, and dedicated circuits for appliances are the most common requests from landlords and property managers. Panel condition and outlet grounding also come up regularly during pre-lease inspections. We work around tenant schedules and confirm access arrangements before the visit.
A panel-level surge protector installs at the service panel and intercepts voltage spikes before they reach the wiring and connected devices. In a region where severe thunderstorms are a regular part of the calendar, that kind of protection covers the whole house from a single installation rather than relying on individual power strips at each device. Adding it during a panel upgrade is a natural time to have the conversation, since the panel is already open.
Yes. A buyer can arrange an electrical inspection before closing, though access to the property needs to be arranged through the seller or their agent. We scope the inspection on the call and confirm what is needed for access before scheduling.
We check whether the fault affects the whole property or only certain circuits. A problem that stops at the meter or affects both legs of the service is likely a utility issue. A fault that affects specific circuits or rooms points to the wiring or panel on the property side, and that is where we work.
In most cases, yes. Working through the property in sections keeps the disruption manageable and allows the rest of the property to stay powered. The sequence depends on the layout and the scope of the work. We confirm the plan before the job starts.
A load calculation adds up the continuous and non-continuous electrical loads across the property, including major appliances, lighting, climate equipment circuits, and anything being added. The result is compared against the rated capacity of the service and panel to determine whether the existing supply can carry the planned load or whether an upgrade is needed first.
Permit requirements for electrical work depend on the scope of the job and whether the property is in the city limits or in a different jurisdiction within Denton County. For panel upgrades and new circuit installations, a permit is typically required, and we confirm what applies to your address before scheduling. The permitting process is part of the job, not something you have to manage separately.
If the power is doing something it should not, or a project needs a circuit that does not exist yet, that is the call to make. We handle it from the first conversation to the finished job.
Call (469) 249-3264 any day between 6:30 AM and 8:30 PM and we will scope the work, give you a price, and get it on the schedule.
One call. One electrician. One price, agreed first.
Also serving: Flower Mound, Grapevine, Euless, Bedford, Hurst.
Below is a plain-language look at the electrical work we handle for homes and commercial properties in Lewisville and across Denton County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call.
If a row describes a problem you recognize, call us at (469) 249-3264 and we will walk through what the job involves and confirm a price before anything is scheduled.
| Type of Work | What the Job Involves | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-to-200-amp service upgradeLoad calculationsPanel replacementCapacity checks before new circuits | Older homes adding appliances, EV chargers, or square footage | Denton County summers put sustained load on panels for months. Older 100-amp services in Lewisville neighborhoods frequently can not keep up with modern household demand. |
| Older-Home Rewiring | Knob-and-tube removal and replacementAluminum branch circuit remediationUngrounded outlet upgradingFull or partial rewire scoping | Homes built before the 1980s with original wiring still in place | Insurance carriers increasingly flag older wiring systems. A pre-sale inspection or a carrier review often prompts the call. We assess the scope and explain what a partial or full rewire involves before any work starts. |
| Wiring & Circuit Installation | New circuit runs from the panelCircuit sizing for the loadWiring for additions and outbuildingsSubpanel installation where needed | Remodels, additions, garages, and workshops that need circuits from scratch | Adding a circuit is often simpler than people expect. Panel capacity is confirmed before any wiring starts mid-job. |
Call (469) 249-3264 any day between 6:30 AM and 8:30 PM and we will walk through what the job involves, confirm a price, and get it on the schedule.
(469) 249-3264